Two Trees sells the Sapphire Pro as a “laser ready” machine. But the stock firmware’s laser mode is often basic. The best firmware for laser-only users is a specifically patched for LightBurn’s advanced features.
This is where you find the “best” configuration. Download the community-optimized printer.cfg from the or Frix-x’s Klipper config collection . Specifically look for: two trees sapphire pro firmware best
Do not just download the first .bin file you find. Join the "Two Trees 3D Printers" Discord or the r/TwoTrees subreddit. Look for the pinned messages in the #Sapphire-Pro channel for the most recent, verified "best" firmware build as of this month. Your Sapphire Pro is a race car on blocks right now—the best firmware is the key to the ignition. Two Trees sells the Sapphire Pro as a
If you want, I can produce a ready-to-flash Marlin configuration tailored to the Two Trees Sapphire Pro (including specific steps/mm, thermistor, and board settings) or a Klipper configuration with input shaping — specify which firmware and I’ll provide the configuration files and exact flashing commands. This is where you find the “best” configuration
Enables high speeds (up to 250mm/s+) and accelerations (up to 10k) while maintaining quality through Input Shaping