You must cut the zip ties holding the carriage and the build plate in place.
*Note: The QIDI X-Pro is a bed-slinger (moves front to back qidi x-pro manual
☐ Remove transport screws ☐ Level bed with paper ☐ Load filament (L & R if dual) ☐ Select print mode (Single/Duplicate/Mirror/Dual) ☐ Preheat bed & chamber ☐ Start print from USB or Wi-Fi (optional) ☐ Monitor first layer – adjust Z offset live if needed ☐ After print – wait for bed to cool to 40°C before removing part You must cut the zip ties holding the