Narco Escort Ii Installation Manual !free! — Full

: 3/16" Allen wrench (for securing the unit in the mounting tray), wire strippers, and soldering/crimping tools for connectors. 2. Wiring and Connector Pinouts (P301)

The Escort II uses a multi-pin connector (P301) for power, audio, and antenna interfacing. For a standard 14V installation, a jumper is required between pins 8 and 10. Wire Size/Color 14/28V Power Input 18 AWG (Red) 2 14/28V Power Input 18 AWG (Red) 3 Airframe Ground 18 AWG (Black) 4 Airframe Ground 18 AWG (Black) 5 Low Level Audio 20 AWG (Green) 6 Headphones Audio (50 mW) 20 AWG (Blue) 9 Transmitter Key 20 AWG (White) 10 Switched A+ (Output) 18 AWG (White/Red) 11 Mike Audio 20 AWG (Brown) 12 Intercom Key 20 AWG (Yellow) 13 Mike/Phones Ground 20 AWG (Black) Data sourced from the Narco Escort II Pinout Diagram . Antenna Installation narco escort ii installation manual full

The unit includes a built-in intercom function activated by grounding Pin 12. Both microphones must be the same manufacturer and model for proper balance. : 3/16" Allen wrench (for securing the unit

The P301 is a 15-pin connector. Looking at the rack from the back, pins are numbered 1–15 from left to right. Wiring Detail Power Input 14/28V DC input 3 Airframe Ground Connection to aircraft skin 5 Low Level Audio 330 ohm impedance; used for audio summing networks 6 Headphones Audio For a standard 14V installation, a jumper is