🔗 https://www.bca.gov.sg/publications/ → Search “CP 4”
, focusing on safety, efficiency, and environmental benefits such as being vibration-free and low-noise Course Hero Key Installation & Termination Guidelines đź”— https://www
A recent project in Singapore involved the installation of jacked foundation piles for a high-rise residential building. The site investigation report revealed a complex soil stratigraphy with layers of soft marine clay, stiff clay, and weathered rock. The design required the installation of 600 mm diameter jacked foundation piles to a depth of 60 m. The installation process was closely monitored, and pile integrity tests were performed on a sample of piles to verify their integrity. The results showed that the piles were installed to the required depth and capacity, with minimal settlement and lateral displacement. The installation process was closely monitored, and pile
Based on GEOSS technical references, BCA’s “Code of Practice for Foundations” (CP 4), and local project case histories shared on GEOSS, the following good practices apply: Piles are typically jacked to 2 to 2
The Geotechnical Society of Singapore (GeoSS) guidelines for jacked foundation piles recommend using jacking machines up to approximately 75% of their maximum capacity to ensure safety and performance. Piles are typically jacked to 2 to 2.5 times the Working Load, with a "set" defined as a downward movement not exceeding 10 mm over a 30-second hold time upon reaching refusal. Read the full Guideline on Jacked Piles (GeoSS) at Course Hero Course Hero